OUTGRYND Shilajit — documentation
Lab Results.
Quality testing and laboratory documentation for OUTGRYND Shilajit, published the way it was issued — including what the paperwork covers and what it does not. Every figure on this page is transcribed from the laboratory certificate issued for this batch. Nothing is estimated.
Higher standards. Stronger humans.
Read this first
Specification And Documentation
Two different things get mixed together on most supplement pages: a product specification and a laboratory result. They are kept apart here, and labelled.
Product specification
70% fulvic acid
The high-strength formulation OUTGRYND specifies for this product. It is the standard we order against — a specification, not a laboratory figure taken from the certificate on this page.
Laboratory report on file
Batch FA2026080501
The batch documented in the report below. Same resin quality, same source, tested at a different fulvic acid strength — a ≥ 40% specification, measured at 40.23%.
What the COA verifies
Safety & Identity
Appearance, microbiological testing, heavy metal testing, storage and shelf life, against USP and EPA reference methods. It does not verify the 70% figure.
Fulvic acid strength
70% Is Our Specification
A specification is what we order. A certificate is what a laboratory measured. We will not print one as the other.
OUTGRYND Shilajit is specified as a high-strength resin at 70% fulvic acid. That is the OUTGRYND product specification agreed with our supplier, and it is presented here as exactly that.
The quality report further down this page is not the document that proves it. It covers batch FA2026080501 of the same resin from the same source, tested against a ≥ 40% fulvic acid specification and measured at 40.23%. Same material quality, different strength.
So the 40.23% figure should be read for what it is: evidence of how this resin performs on purity, microbiological safety and heavy metals — not evidence of the 70% strength. Anyone telling you a single certificate does both is asking you not to read it.
A batch-specific certificate for the 70% formulation will be published on this page once it has been issued for the batch on sale. Until then, the specification is labelled as a specification.
Transcribed from the certificate
Quality Testing
Every row below comes from supplier COA batch FA2026080501. Rows marked with an asterisk carry a value that describes that batch rather than the OUTGRYND product specification.
Physical
Appearance
- Limit
- Brown black paste
- Result
- Pass
- Method
- USP <2021>
Physical
Fulvic acid content
- Limit
- ≥ 40%
- Result
- 40.23%
- Method
- USP <2021>
Microbiological
Total plate count
- Limit
- < 10⁷ cfu/g
- Result
- Pass
- Method
- USP <2021>
Microbiological
Yeast and mould
- Limit
- < 10⁵ cfu/g
- Result
- Pass
- Method
- USP <2021>
Microbiological
Enterobacteriaceae
- Limit
- < 10⁴ cfu/g
- Result
- Pass
- Method
- USP <2021>
Microbiological
Escherichia coli
- Limit
- Negative
- Result
- Pass
- Method
- USP <2022>
Microbiological
Salmonella spp.
- Limit
- Negative
- Result
- Pass
- Method
- USP <2022>
Microbiological
Staphylococcus aureus
- Limit
- Negative
- Result
- Pass
- Method
- USP <2022>
Heavy metals
Cadmium
- Limit
- < 0.5 µg/g
- Result
- Pass
- Method
- EPA 6010C / 7471B
Heavy metals
Arsenic
- Limit
- < 1.5 µg/g
- Result
- Pass
- Method
- EPA 6010C / 7471B
Heavy metals
Lead
- Limit
- < 0.5 µg/g
- Result
- Pass
- Method
- EPA 6010C / 7471B
Heavy metals
Mercury
- Limit
- < 1.5 µg/g
- Result
- Pass
- Method
- EPA 6010C / 7471B
Fulvic acid content of 40.23% against a ≥ 40% limit is the value recorded for supplier COA batch FA2026080501. It is not the OUTGRYND 70% fulvic acid product specification and is not presented as verification of it.
“Pass” is the result wording used on the certificate itself: the parameter met the stated limit. Where the certificate records a measured number instead of a pass, the number is shown.
What was tested
Testing In Detail
For a natural resin, safety testing matters more than any marketing figure. These are the categories covered by the supplier certificate, with the limits it was tested against.
Microbiological Testing
Total plate count, yeast and mould, and Enterobacteriaceae tested against stated limits; E. coli, Salmonella and Staphylococcus aureus tested for absence. All recorded as passing on the displayed certificate.
- Total plate count< 10⁷ cfu/g · Pass
- Yeast and mould< 10⁵ cfu/g · Pass
- Enterobacteriaceae< 10⁴ cfu/g · Pass
- Escherichia coliNegative · Pass
- Salmonella spp.Negative · Pass
- Staphylococcus aureusNegative · Pass
Heavy Metal Testing
Cadmium, arsenic, lead and mercury tested against stated limits using EPA 6010C / 7471B methods. This is the category that separates a properly purified resin from a raw one, which is why it is published rather than summarised.
- Cadmium< 0.5 µg/g · Pass
- Arsenic< 1.5 µg/g · Pass
- Lead< 0.5 µg/g · Pass
- Mercury< 1.5 µg/g · Pass
Quality Documentation
The paperwork around the results: the conclusion recorded by the issuing laboratory, the reference methods used, batch traceability, and the storage and shelf-life conditions stated on the document.
- Conclusion
- Conform to specification
- Reference methods
- USP <2021>, USP <2022>, EPA 6010C / 7471B
- Batch traceability
- Batch FA2026080501, with analysis and expiry dates stated
- Storage
- Store in a cool, dry place, away from direct strong heat.
- Shelf life
- Three years sealed, stored away from direct sunlight.
The report
OUTGRYND Quality Report
Every parameter, limit, result and reference method from the laboratory certificate for this batch, transcribed in full and set out in plain English. Nothing added, nothing removed.
- Product name
- Shilajit resin
- Batch number
- FA2026080501
- Manufacture date
- 2026 / 08 / 05
- Analysis date
- 2026 / 08 / 06
- Expiry date
- 2028 / 08 / 05
- Conclusion
- Conform to specification
- Fulvic acid on this document
- 40.23% against a ≥ 40% limit
Important note on this report
The batch documented here corresponds to the same resin quality and the same source as OUTGRYND Shilajit, but to a different fulvic acid strength — a ≥ 40% specification measured at 40.23%. OUTGRYND Shilajit is specified at 70% fulvic acid. This document is published for the purity, microbiological and heavy metal testing it records; it does not verify the 70% figure, and we do not present it as doing so.
OUTGRYND
Quality & testing report
Report reference
OG-SHJ-FA2026080501
- Product
- OUTGRYND Shilajit Resin — 50 g
- Material
- Himalayan Shilajit resin
- Batch tested
- FA2026080501
- Analysis date
- 2026 / 08 / 06
- Reference methods
- USP / EPA
- Conclusion
- Conform to specification
OUTGRYND product specification
70% Fulvic
The high-strength formulation we order against. A specification — not a result on this report.
Value recorded on batch FA2026080501
40.23% Fulvic
Tested against a ≥ 40% limit. Same resin, same source, different strength to the OUTGRYND specification.
Parameters tested
Appearance
Physical · Brown black paste · USP <2021>
Pass
Fulvic acid content
Physical · ≥ 40% · USP <2021>
40.23%
Total plate count
Microbiological · < 10⁷ cfu/g · USP <2021>
Pass
Yeast and mould
Microbiological · < 10⁵ cfu/g · USP <2021>
Pass
Enterobacteriaceae
Microbiological · < 10⁴ cfu/g · USP <2021>
Pass
Escherichia coli
Microbiological · Negative · USP <2022>
Pass
Salmonella spp.
Microbiological · Negative · USP <2022>
Pass
Staphylococcus aureus
Microbiological · Negative · USP <2022>
Pass
Cadmium
Heavy metals · < 0.5 µg/g · EPA 6010C / 7471B
Pass
Arsenic
Heavy metals · < 1.5 µg/g · EPA 6010C / 7471B
Pass
Lead
Heavy metals · < 0.5 µg/g · EPA 6010C / 7471B
Pass
Mercury
Heavy metals · < 1.5 µg/g · EPA 6010C / 7471B
Pass
Attribution
Testing was performed by the manufacturing laboratory that supplies this resin, against the USP and EPA reference methods listed above. OUTGRYND does not operate its own laboratory: the values on this report are transcribed, unchanged, from the certificate of analysis issued for batch FA2026080501. The source document is available on request.
Fulvic acid content is the value recorded for this batch against its ≥ 40% limit. It is not the OUTGRYND 70% fulvic acid specification and is not published as verification of it.
How we handle documentation
No Guesswork. No Shortcuts.
If it is not in the paperwork, it does not go on this page.
Selection
Months of searching, dozens of options considered, one standard that never moved. We chose a resin on quality and documentation, not on price or availability.
Lab documentation
Testing is requested, read and kept on file. Microbiological safety, heavy metals, appearance and fulvic content are documented against published reference methods.
Transparency
The certificate is shown as issued, including what it does not cover. Where a figure belongs to a different batch or strength, this page says so instead of leaving it ambiguous.
OUTGRYND Shilajit is a dietary supplement. These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure or prevent any disease.
OUTGRYND Shilajit — 50 g Himalayan resin
Documented. Then Sold.
Selected after months of research, published with its paperwork attached. Read the certificate, then decide.